Finish Carpentry · Lubbock & West Texas

Finish Carpentry in Lubbock, Texas

Trim, Casing, Moldings and Custom Finish Carpentry at Our Wolfforth Workshop

Need baseboards, casing or a molding made to match the trim in an older home? Bring your plan to our Wolfforth shop, about 12 miles from Lubbock. Call 806-414-1519 or request an estimate online. Send photos and measurements first, and we will tell you what is possible.

What Is Finish Carpentry, and How Is It Different From Rough Carpentry?

Finish carpentry is the trim work you see in a home, such as baseboards, door and window casing, crown molding and wainscoting. Rough carpentry builds the frame behind the walls. Finish carpentry comes last, just before paint or stain, and it decides how clean a room looks. Some people call it finishing carpentry.

Rough carpentryFinish carpentry
WhenEarly, before walls closeLast, before paint or stain
WorkFraming, studs, joists, roofTrim, casing, moldings, wall panels
Seen?HiddenAlways seen
JointsSmall gaps are coveredTight joints show

Who Does Finish Carpentry in Lubbock?

Reimagined Antiques does finish carpentry in Lubbock at our workshop in Wolfforth, about 12 miles southwest of the city. From Texas Tech or downtown, take the Marsha Sharp Freeway (US 62/82). The drive takes about 16 minutes.

If you searched for finish carpentry Lubbock, this is the shop. We are a repair workshop, not a furniture store. We work on trim the way we work on old furniture: tight joints, matched profiles and a clean finish.

What Finish Carpentry Services Do We Offer?

Our finish carpentry services cover trim that is made and repaired at our shop.

Baseboards and Shoe Molding

Baseboards cover the gap where the wall meets the floor. Shoe molding or quarter round hides small gaps on an uneven floor.

Door and Window Casing

Casing frames a door or window. We make casing, window stool and apron pieces, and door jamb parts.

Crown Molding and Chair Rail

Crown molding sits where the wall meets the ceiling. Chair rail runs along the wall at about the height of a chair back.

Wainscoting and Wall Panels

Wainscoting is paneling on the lower part of a wall. Beadboard is a common style.

Custom Moldings Matched to Old Profiles

A profile is the shape of the molding’s edge. We copy the profile of old trim so a new piece fits next to it. For old pieces, see our antique furniture restoration page.

Trim Repair

Cracked, split or damaged trim can often be repaired instead of replaced. We fill, patch and refinish it.

Trim vs Molding vs Casing: What Is the Difference?

Trim is the broad word for the finish pieces around doors, windows, floors and ceilings. Molding is the shaped, decorative part of trim. Casing is the trim that frames a door or window. All three are part of finish carpentry.

TermWhat it isExample
TrimAll finish piecesBaseboard, casing, crown
MoldingShaped, decorative trimCrown molding, chair rail
CasingTrim around openingsDoor and window casing

Which Rooms Need Interior Finish Carpentry?

Interior finish carpentry shows up in nearly every room. Living and dining rooms use baseboards, crown molding and chair rail. Halls and stairs use baseboards and wall panels. Doors and windows in every room use casing. Bathrooms and laundry rooms need trim that can handle damp air.

Why Choose Custom Finish Carpentry Over Stock Trim?

Choose custom finish carpentry when stock trim does not match what you have. Stock trim comes in set shapes and sizes. Custom trim is cut to your profile, width and wood. It costs more and takes longer, but it fits an older room.

CustomStock
ProfileMatched to yoursSet shapes only
WoodYou chooseOften MDF or pine
CostHigherLower

What Wood or Material Should You Choose for Trim?

Choose by where the trim goes and how it will be finished. The U.S. Forest Service Forest Products Laboratory explains in its Wood Handbook that wood takes in and gives off moisture and changes size as it does. Finish carpentry in Lubbock has to allow for that.

MaterialBest forWhat to know
MDFPainted trim in dry roomsCannot be stained, swells in damp rooms, chips
PinePainted or stained trimSoft, dents easily
PoplarPainted trimSmooth, takes paint well
OakStained trimHard, strong grain

Why Does Trim Gap or Crack in Lubbock Homes?

Trim gaps open because wood shrinks and swells with the air. Lubbock gets about 18 inches of rain a year, and the air is dry. In dry months wood gives off moisture and shrinks, so joints open and caulk cracks. In humid weeks it swells again.

Can Finishing Carpentry Match Old Trim in an Older Home?

Often, yes. Matching old trim is the part of finishing carpentry we do best, because we work on old wood every day. Older homes often have crooked walls and tall, plain profiles that do not match a store shelf.

To match, we measure the old profile, pick a wood with a similar grain, test stain or paint on scrap, and blend the new piece in. An exact match is not always possible, so we tell you what to expect. For color, see our furniture staining page and furniture refinishing page.

What Affects Finish Carpentry Prices in Lubbock?

We do not post a flat price, because every job is different. Cost depends on the linear feet of trim, the number of corners, the profile, the wood, the finish, and whether old trim must come off. Simple pieces cost less than wide or detailed ones.

For finish carpentry in Lubbock, we send a time-and-materials estimate after we see your photos and measurements, before work starts.

How Does Finish Carpentry in Lubbock Work at Our Wolfforth Shop?

  1. Request an estimate. Our online form asks for your name, details about the job, photos and measurements.
  2. Get your estimate. We review your details and send a time-and-materials estimate. It says who fills nail holes and caulks the seams.
  3. Accept it. Work follows a first-in, first-out line, set by deposit date and an accepted estimate.
  4. Wait your turn. We give you timing in the estimate.
  5. Build and finish. We cut, fit and finish the trim at our shop.
  6. Pick up. We contact you when the work is ready at our Wolfforth workshop.

Can I Install Trim Myself, or Should I Hire a Finish Carpenter?

You can install simple trim yourself if you have a miter saw and patience. Hire a finish carpenter for tall crown molding, tight corners, wide casing or a profile that must match old trim.

Do it yourselfHire a pro
Best forShort, simple runsCrown, corners, matched trim
RiskGaps at cornersLower
CostMaterial onlyLabor and material

How Can You Tell a Finish Carpenter Will Do Good Work?

Look for tight joints, a clear estimate and a plan for the finish. Ask whether corners are coped or mitered, how the trim meets an uneven floor, and who fills nail holes before paint.

Customers on our Google profile describe our team as courteous and on time, and praise a restored china cabinet.

Finish Carpentry Near Me: Lubbock and Wolfforth

Our shop is in Wolfforth on the Marsha Sharp Freeway (US 62/82). Dowden Road (FM 179) is the main north-south road. We serve Lubbock and the rest of West Texas.

If you search for finish carpentry near me, you want a shop close enough to visit. We are a drop-off workshop. You bring in your details and pick up at our shop. For cabinets, see our custom cabinetry page. For tables, shelves and replacement parts, see our custom woodworking page.

Finish Carpentry in Lubbock FAQs

Finish carpentry is the visible trim work in a home, such as baseboards, casing, crown molding and wainscoting. It is done last, just before paint or stain.

Often, yes. Cracks, splits and small missing pieces can be filled, patched and refinished. Send photos, and we will tell you if repair makes sense.

Trim is the broad word for finish pieces. Molding is the shaped, decorative part. Casing frames doors and windows.

It depends on the linear feet, corners, profile, wood and finish. We do not post a flat price. We send a time-and-materials estimate before work starts.

Poplar and pine are good for paint. Oak is good for stain. MDF is low cost for painted trim in dry rooms, but it swells in damp air and cannot be stained.

Often, yes. We measure the profile, pick a similar wood, test the finish and blend the new piece in. An exact match is not always possible.

It depends on the job and our queue. Work follows a first-in, first-out line. We give you timing in the estimate.

We build and repair at our Wolfforth workshop, and you pick up the finished work there. We do not pick up furniture. If you need help with installation, tell us in your request and we will say what we can do.

Related Services

Ready to Plan Your Trim?

Call 806-414-1519 or request an estimate online. Then bring your details to our Wolfforth workshop.

13405 Upland Ave 1600, Suite 28, Wolfforth, TX 79382